Solid-wood truss and rafters seen from inside a timber frame being raised
Process

Process, price and questions about timber frame

From idea to turnkey: here is how we work, what affects the budget and the answers to the most frequent questions.

Four main stages

From idea to turnkey

Every project is unique, but the road is always the same: talk, draw, cut, raise.

  1. 1. Meeting

    We discuss your land, your needs, your tastes and your budget. We can travel to your place. The estimate is free.

  2. 2. Plans and design

    We draw the frame, choose the species and joinery, and refine the plans. The detailed quote is prepared at this stage.

  3. 3. Fabrication in the workshop

    Every beam and post is cut with care, using craft methods, from selected wood.

  4. 4. Raising and finishing

    The frame is raised on your foundation. Interior and exterior finishing can follow, all the way to turnkey.

Budget

What affects the price of a project

There is no universal price per square foot for a solid-wood frame. Here are the main factors that make a budget vary:

  • The size and complexity of the frame (number of trusses, knee braces, volumes)
  • The wood species chosen and where the pieces come from
  • The building envelope and the level of finishing
  • What is included: frame only, raising, envelope or turnkey
  • The condition of the land, the foundation and access to the site

Our approach: a free estimate to set the order of magnitude, then a detailed quote once the plans are drawn.

Knee braces and tie beam of a solid-wood frame, seen from inside
Frequently asked questions

Your questions, our answers

Is your question not here? Call or email us: Pierre-Luc will answer.

How much does a timber frame home cost?

There is no single price: cost depends on size, frame complexity, species, finishes and what is included (frame only, building envelope or turnkey project). We start with a meeting and a free estimate. The detailed quote comes next, once the plans are drawn, so that every figure rests on a precise project.

How long should I plan for?

It varies with the project and the season. The main stages are design, fabrication of the pieces in the workshop, raising on your foundation, then finishing. Once the pieces are cut, the frame goes up much faster than it was made. The earlier you contact us, the more comfortable the planning.

Which wood species should I choose?

We work with Douglas fir (strong and warm in tone), eastern white pine (light and stable), hemlock (fine grain and soft tone) and oak (dense and noble). The right choice depends on style, use and budget: we discuss it together.

Can I take part in the work (owner-building)?

Yes. We gladly support owner-building: you do part of the job, with our advice, and we take care of what requires our know-how.

Can the wood from my land be used?

If you wish and if the trees are suitable, we harvest the lumber for your building right on your land.

What is the difference between timber frame and standard wood framing?

A timber frame is a solid-wood structure, joined by mortise and tenon and left exposed. Standard framing uses common-dimension studs, hidden in the walls. We build both and advise you according to your needs.

Is a permit required?

Most construction, addition or renovation projects require a permit from your municipality, which specifies the documents needed. We discuss it at the first meeting.

What maintenance does a solid-wood frame need?

Very little inside. Outside, wood exposed to the weather needs suitable protection, which we plan with you from the design stage.

Do you restore old buildings?

Yes. We restore old frames, barns and heritage buildings with traditional techniques. Learn more.

How can I reach you?

By phone at 819 212-5152 or by email at petebrassard@hotmail.com. We answer every request personally.

Finished solid-wood frame, backlit, under a dramatic sky
Free estimate

Let's talk about your project.

A home, an addition, a barn to save or a custom staircase: call or email us and Pierre-Luc will answer you personally.

819 212-5152
CallEmail